New 3046R Compact Utility Tractor

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere3046R Compact Utility Tractor

Add Model --Please Select-- 3025D (Model year 2024) 3025E (Model year 2024) 3032E (Model year 2024) 3033R (Model year 2024) 3035D (Model year 2024) 3038E (Model year 2024) 3039R (Model year 2024) 3043D (Model Year 2024) 4044M HST/PRT (Model year 2024) 4044R HST/PRT (Model year 2024) L4760 GST, HST, HSTC

Add Model --Please Select-- 3025D (Model year 2024) 3025E (Model year 2024) 3032E (Model year 2024) 3033R (Model year 2024) 3035D (Model year 2024) 3038E (Model year 2024) 3039R (Model year 2024) 3043D (Model Year 2024) 4044M HST/PRT (Model year 2024) 4044R HST/PRT (Model year 2024) L4760 GST, HST, HSTC

Engine power (gross)	SAE J1995 rated power: 33.3 kW 44.7 hp 45.3 PS at 2600 rpm
Power take-off (PTO) power	25.2 kW 33.9 hp
Steering hydraulics	23.5 L/min 6.2 gpm
Implement hydraulics	34.3 L/min 9.1 gpm
Hitch type	Category 1
Lift capacity, 24-in. behind link arms	995 kg 2194 lb
Standard transmission; forward/reverse	eHydro transmission
Cruise control	Standard
Approximate shipping weight (open-station; cab)	Open operator station (OOS): 1391 kg 3066 lb Cab: 1818 kg 4008 lb
Wheelbase	1727 mm 68 in.

Family
Manufacturer	Yanmar®
Engine model	3TNV86CHT-MJTV
Engine power (gross)	SAE J1995 rated power: 33.3 kW 44.7 hp 45.3 PS at 2600 rpm
Power take-off (PTO) power	25.2 kW 33.9 hp
Rated engine speed	2600 rpm
Type	Diesel
Injection pump type	High pressure common rail direct injection
Aspiration	Turbocharged and intercooled
Emissions compliance	Final Tier 4
Cylinders/displacement	Three cylinders: 1.57 L 95.7 cu in.
Number of cylinders	Three
Cylinder liners	Cast-in-block
Bore and stroke	86 x 90 mm 3.4 x 3.54 in.
Compression ratio	19.1:1
Lubrication	Pressurized
Cooling system	Liquid
Air cleaner	Dual element
Engine torque at rated speed	112.3 Nm 90 lb-ft
Fuel tank capacity	OOS: 37.4 L 10 U.S. gal. Cab only: 47.6 L 12.6 U.S. gal.

Battery size	500 CCA
Alternator (12-V)	75 amp
Starter size	1.4 kW 1.9 hp

Type	High pressure common rail direct injection
Fuel consumption

Standard transmission; forward/reverse	eHydro transmission
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges	Three-range, infinitely variable
Final drive	Spur gear
Brakes	Wet disk
Steering	Hydrostatic power steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacity	Front 1450 kg 3197 lb Rear 1850 kg 4079 lb
Creeper
Cruise control	Standard
Differential lock
Drawbar maximum vertical load

Type	Open center
Pump rated output	Steering 23.5 L/min 6.2 gpm Implement 34.3 L/min 9.1 gpm 57.8 L/min 15.3 gpm
Pump type	Single gear
Maximum operating pressure	172 bar 2495 psi
Draft control sensing	Position control
Remote control valves available	Up to six rear remotes

Type	Category 1
Lift capacity, 24-in. behind link arms	995 kg 2194 lb

Standard	Independent rear: 540 rpm
Optional	Mid: 2100 rpm
Control	Lever and switch
Clutch	Wet disk
Brake (for mid and rear PTO)	Wet disk
Engagement method

Crankcase with filter	5.7 L 6 gal.
Transmission and hydraulic system	26.5 L 7 U.S. gal.

Type	Spur gear
Differential lock

Rollover protective structure	Type Foldable
Platform - flat/straddle	One-piece semi flat
Gear shift location - console/floor

Compliance	Complies with OSHA, SAE, and CSA standards for rollover protection
Visibility	360 degree (angle)
Air conditioning, temperature differential
Doors	Two
Noise rating	80 dBA
Seat equipment	Scissor-link

Height
Wheelbase	1727 mm 68 in.
Front axle clearance	Minimum: 171 mm 6.7 in. Maximum: 299 mm 11.8 in.
Turning radius with brakes	2.7 m 8.8 ft
Turning radius without brakes	2.8 m 9.2 ft
Limited slip differential
Approximate shipping weight (open-station; cab)	OOS: 1391 kg 3066 lb Cab: 1818 kg 4008 lb

Front	R1 Bar: 7-14 R3 Turf : 27x8.50-15 R3 Turf Special: 25/10.5LLx15 R4 Industrial: 25x8.5-14 or 27x8.5-15
Rear	R1 Bar: 11.2-24 R3 Turf: 41x14-20 R3 Turf Special: 41x18LL-16.1 R4 Industrial: 15-19.5 or 43x16-20
Front tread range	1117 mm 44 in.
Rear tread spacing	1031 mm 40.6 in.

Toolbox
Tilt steering wheel
12-V Outlet