New X350R Lawn Tractor with 42-inch Rear-Discharge Deck

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereX350R Lawn Tractor with 42-inch Rear-Discharge Deck

Add Model --Please Select-- X330-42A (Model year 2023) X330-48A (Model year 2023) X350-42A (Model year 2023) X350-48A (Model year 2023) X350 less mower (Model year 2023) X354-42A (Model year 2023) X370-42A (Model year 2023) X380-48A (Model year 2023) X380-54A (Model year 2023) X384-48A (Model year 2023) X390-48A (Model year 2023) X390-54A (Model year 2023) X394-48A (Model year 2023)

Add Model --Please Select-- X330-42A (Model year 2023) X330-48A (Model year 2023) X350-42A (Model year 2023) X350-48A (Model year 2023) X350 less mower (Model year 2023) X354-42A (Model year 2023) X370-42A (Model year 2023) X380-48A (Model year 2023) X380-54A (Model year 2023) X384-48A (Model year 2023) X390-48A (Model year 2023) X390-54A (Model year 2023) X394-48A (Model year 2023)

Engine power	21.5 hp 16.0 kW
Oil change	No-tools oil drain with replaceable filter
Engine manufacturer/model	FR651V
Transaxle type	K46 hydrostatic integrated with transaxle
Transaxle control	Twin Touch™ pedals
Rear tires	20x10-8
Lift system type	Foot pedal with non-adjustable spring assist, optional adjustable spring assist kit available (required for snow blower use)
Cutting width	42 in. 107 cm
U.S. warranty	4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

Power	21.5 hp 16.0 kW
Displacement	44.3 cu in. 726 cc
Manufacturer/model	FR651V
Type	Overhead valve, full-pressure lube, oil filter
Cylinders	V-twin, cast-iron liners
Governor	Mechanical
Choke/speed control	Separate levers, automatic choke return
Cooling method	Air
Air cleaner	Dry, replaceable
Oil change	No-tools oil drain with replaceable filter

Type	Gasoline
Fuel delivery	Pulse pump, carburetor
Fuel gauge	Low fuel indicator
Fuel tank location	Rear
Fuel fill opening	On left fender, 3 in. 7.6 cm
Fuel tank capacity	2 U.S. gal. 7.6 L

Battery	12 V 340 CCA
Charging system	Flywheel alternator, regulated, 12 amp
Engine starter	Bendix
Hour meter	Yes
Headlights	Two standard, incandescent, 27 W
Taillights or reflector	No
Backup lights	No
Rear work lights	No
12-V outlet	Optional

Type	K46 hydrostatic integrated with transaxle
Control	Twin Touch™ pedals
Cruise control	Yes, button on dash
Oil cooler	Fins and fan on transaxle
Oil filter	Internal, not replaceable
Differential lock	No
Forward speed	0-5.3 mph 0-8.5 km/h
Reverse speed	0-4 mph 0-6.4 km/h
Brakes	Internal wet disc

Frame	Welded heavy-duty
Primer/paint	E-coat/powder
Weight bracket	Optional front
Receiver hitch	No
Front axle	Cast iron front axle, front wheel ball bearings
Spindle bushings	No
Front tires	15x6-6
Rear tires	20x10-8
Hood material	Fully enclosed, molded-in color material reduces sound, will not rust or dent
Fender deck material	Stamped steel
Floor mats	Sure-grip rubber
Storage	Yes, under seat and covered toolbox
Service interval decal	Yes
Fender handles/grips	No
Cup holder	Yes
Equipment mounting	Yes, front
Maximum towing capacity	600 lb 272 kg

Type	Manual, sector and pinion
Four-wheel steer	Not available on this model
Steering wheel	Large, 14 in. 35.6 cm
Tilt steering wheel	No
Turning radius	16.5 in. 42 cm
Uncut circle radius	Right, 23 in. 58.4 cm Left 28 in. 71.1 cm

Type	Open-back design with grasp
Seat back height	15 in. 38 cm
Armrests	No
Fore-aft adjustment	While seated, ball bearing slide rail, 15-position, 6.6 in. 17 cm
Seat suspension	Tilt, two coil springs, three-position no-tools adjustment for operator weight

Type	Foot pedal with non-adjustable spring assist, optional adjustable spring assist kit available (required for snow blower use)
Hydraulic outlets	No
Mower cut height	13 positions, 1-4 in. 2.5-9.5 cm
Cut height increments	0.25 in. 0.64 cm
Preset cut height	Yes

Type	Rear discharge, rear collect, mulch
Cutting width	42 in. 107 cm
Construction	Stamped steel deck shell
Mower deck material	11 gauge 0.120 in. 3 mm
Mower wash port	Yes
Mower drive system	Electric power take-off (PTO) clutch, in-line belt
Mower wheels	Three
Mower wheel adjustment	Four-position, tool required
Mower level adjustment	Exact Adjust ports and onboard deck-leveling gauge

Type	Slide under tractor
Front draft arms	Attached with spring pins at two points
Rear draft arms	Two pins and spring clips
Mower wheels rotate	No
Drive system	Dual belt

Meets ANSI standard	Yes
Meets OPEI standard	Yes
Backup protection	Reverse Implement Option (RIO)
Safety video	Yes

Notes	Includes rear hopper and mulch plug, optional rear deflector available Fully enclosed, molded-in color material reduces sound, will not rust or dent Durable E-coat primer and powder-paint finish
Warranty	4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

Mowers	Rear discharge, rear collect (standard), 42 in. 107 cm
Rear bagger	Rear hopper, 8.5 bu 300 L
Powered material collection
Mulching system	Standard mulch plug
Front thatcher	38, 46, 54 in. 96.5, 116.8, 137.2 cm
Front blade	44 in. 111.8 cm
Mid-mount blade
Snow blower	Two-stage, 44 in. 111.8 cm
Rotary broom
Rotary tiller
Sleeve hitch
3-point hitch
Rear power take-off (PTO)
Plow, moldboard
Box scraper
Cultivator
Rear blade
Disk harrow
Landscape rake
Sprayer	Tow-behind, 15 U.S. gal. 56.8 L Tow-behind, 25 U.S. gal. 94.6 L
Spreader	Tow-behind, 125 lb 57.7 kg Tow-behind, 175 lb 79.4 kg
Front bumper	Styled bumper option
Brush guard	Yes
Weather protection
Sun canopy
Rear receiver hitch
Bucket holder
Grass striping	Lawn striping kit
Tractor shovel	40 in. 101.6 cm
Front loader
Other equipment
Tow-behind tools	16

Height	46.1 in. 1171 mm
Overall length	97.2 in. 2468 mm
Wheelbase	50.2 in. 1275 mm
Width with mower	43.8 in. 1112 mm
Width without mower	37.9 in. 962 mm
Weight	Mower, no fuel: 646 lb 293 kg
Width with mower (deflector raised for storage)

Manufacturing location	Horicon, Wisconsin, USA
Date collected	3-Oct-22