New X380 Lawn Tractor with 48-in. Deck

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereX380 Lawn Tractor with 48-in. Deck

Add Model --Please Select-- X330-42A (Model year 2023) X330-48A (Model year 2023) X350-42A (Model year 2023) X350-48A (Model year 2023) X350 less mower (Model year 2023) X350R-42R (Model year 2023) X354-42A (Model year 2023) X370-42A (Model year 2023) X380-54A (Model year 2023) X384-48A (Model year 2023) X390-48A (Model year 2023) X390-54A (Model year 2023) X394-48A (Model year 2023) XT2 GX50 T2290KWT-48

Add Model --Please Select-- X330-42A (Model year 2023) X330-48A (Model year 2023) X350-42A (Model year 2023) X350-48A (Model year 2023) X350 less mower (Model year 2023) X350R-42R (Model year 2023) X354-42A (Model year 2023) X370-42A (Model year 2023) X380-54A (Model year 2023) X384-48A (Model year 2023) X390-48A (Model year 2023) X390-54A (Model year 2023) X394-48A (Model year 2023) XT2 GX50 T2290KWT-48

Engine power	23 hp 17.2 kW
Oil change	No-tools oil drain with replaceable filter
Engine manufacturer/model	FR691V
Transaxle type	K58 hydrostatic integrated with transaxle
Transaxle control	Twin Touch™ pedals
Rear tires	22x11-10
Lift system type	Foot pedal with adjustable spring assist
Cutting width	Accel Deep™ mower deck, 48 in. 122 cm
U.S. warranty	4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

Power	23 hp 17.2 kW
Displacement	44.3 cu in. 726 cc
Manufacturer/model	FR691V
Type	Overhead valve, full-pressure lube, oil filter
Cylinders	V-twin, cast-iron liners
Governor	Mechanical
Choke/speed control	Separate levers, automatic choke return
Cooling method	Air
Air cleaner	Dry, replaceable
Oil change	No-tools oil drain with replaceable filter

Type	Gasoline
Fuel delivery	Pulse pump, carburetor
Fuel gauge	Gauge on dash
Fuel tank location	Rear
Fuel fill opening	On left fender, 3 in. 7.6 cm
Fuel tank capacity	3.3 U.S. gal. 12.5 L

Battery	12 V 340 CCA
Charging system	Flywheel alternator, regulated, 12 amp
Engine starter	Bendix
Hour meter	Yes
Headlights	Two standard, incandescent, 27 W
Taillights or reflector	No
Backup lights	No
Rear work lights	No
12-V outlet	Optional

Type	K58 hydrostatic integrated with transaxle
Control	Twin Touch™ pedals
Cruise control	Yes, button on dash
Oil cooler	Fins and fan on transaxle
Oil filter	Internal, not replaceable
Differential lock	No
Forward speed	0-6.2 mph 0-10 km/h
Reverse speed	0-3.5 mph 0-5.6 km/h
Brakes	Internal wet disc

Frame	Welded heavy-duty
Primer/paint	E-coat/powder
Weight bracket	Standard rear, optional front
Receiver hitch	No
Front axle	Cast iron front axle, front wheel ball bearings
Spindle bushings	No
Front tires	15x6.5-8
Rear tires	22x11-10
Hood material	Fully enclosed, molded-in color material reduces sound, will not rust or dent
Fender deck material	Stamped steel
Floor mats	Sure-grip rubber
Storage	Yes, under seat and covered toolbox
Service interval decal	Yes
Fender handles/grips	No
Cup holder	Yes
Equipment mounting	Yes, heavy duty
Maximum towing capacity	600 lb 272 kg

Type	Manual, sector and pinion
Four-wheel steer	Not available on this model
Steering wheel	Large, 14 in. 35.6 cm
Tilt steering wheel	No
Turning radius	16 in. 40.6 cm
Uncut circle radius	21 in. 53.3 cm

Type	Cut-and-sewn high-back
Seat back height	18 in. 46 cm
Armrests	Optional
Fore-aft adjustment	While seated, ball bearing slide rail, 15-position, 6.6 in. 17 cm
Seat suspension	Tilt, two coil springs, three-position no-tools adjustment for operator weight

Type	Foot pedal with adjustable spring assist
Hydraulic outlets	No
Mower cut height	13 positions, 1-4 in. 2.5-10.2 cm
Cut height increments	0.25 in. 0.64 cm
Preset cut height	Yes

Type	Side discharge
Cutting width	Accel Deep™ mower deck, 48 in. 122 cm
Construction	Forged steel deck shell
Mower deck material	10 gauge 0.135 in. 3.4 mm
Mower wash port	Yes
Mower drive system	Electric power take-off (PTO) clutch, in-line belt
Mower wheels	Four
Mower wheel adjustment	Seven-position, spring-loaded pin
Mower level adjustment	Exact Adjust ports and onboard deck-leveling gauge

Type	Roll under tractor
Front draft arms	Attached with spring pins at two points
Rear draft arms	Quick-pull pins
Mower wheels rotate	Yes, 90 degrees for easy mower removal
Drive system	Dual belt

Meets ANSI standard	Yes
Meets OPEI standard	Yes
Backup protection	Reverse Implement Option (RIO)
Safety video	Yes

Notes	Fully enclosed, molded-in color material reduces sound, will not rust or dent Durable E-coat primer and powder-paint finish
Warranty	4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

Mowers	48A (standard)
Rear bagger	7, 19 bu 247, 670 L
Powered material collection	Power Flow™ blower
Mulching system	Yes, MulchControl™
Front thatcher	38, 46, 54 in. 96.5, 116.8, 137.2 cm
Front blade	44 in. 111.8 cm
Mid-mount blade
Snow blower	Two-stage, 44 in. 111.8 cm
Rotary broom
Rotary tiller
Sleeve hitch
3-point hitch
Rear power take-off (PTO)
Plow, moldboard
Box scraper
Cultivator
Rear blade
Disk harrow
Landscape rake
Sprayer	Tow-behind, 15 U.S. gal. 56.8 L Tow-behind, 25 U.S. gal. 94.6 L Mounted, 25 U.S. gal.
Spreader	Tow-behind, 25 lb 57.7 kg Tow-behind, 175 lb 79.4 kg Mounted, 125 lb
Front bumper	Styled bumper option
Brush guard	Yes
Weather protection	Weather enclosure
Sun canopy	Yes
Rear receiver hitch
Bucket holder	Yes, double bucket
Grass striping	Lawn striping kit
Tractor shovel	40 in. 101.6 cm
Front loader
Other equipment
Tow-behind tools	16

Height	49 in. 1244 mm
Overall length	72.3 in. 1836 mm
Wheelbase	49.4 in. 1255 mm
Width with mower	62.6 in. 1590 mm
Width with mower (deflector raised for storage)	52.6 in. 1335 mm
Width without mower	39.4 in. 1000 mm
Weight	Mower, no fuel: 651 lb 295 kg

Manufacturing location	Horicon, Wisconsin, USA
Date collected	3-Oct-22