New LW12 Series In-Line Bale Wrapper

Bale Equipment
Key Features
  • Bale push is integrated into machine
  • Wrapping cycle shuts down when out of film
  • 120 bales per hour
  • Central control box operates all hydraulic functions

More Info


Bale push is integrated into machine
Optional bale push-off armOptional bale push-off arm
Operator needs to extend armOperator needs to extend arm

The bale push moves the bale to the back of the bale wrapper. From this point, the operator can utilize the optional bale push-off arm to finish the process. The operator moves a lever to extend the arm, and the arm pushes the bale off onto the ground.

Film wrap sensor shuts down wrapping cycle when out of film
Sensor comprised of silver rod and limit switchSensor comprised of silver rod and limit switch

The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.

Traction implement tires great on wet and uneven terrain
Assist in difficult field conditionsAssist in difficult field conditions

Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.

The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.

Options available to increase productivity and uptime
14.9-kW (20-hp) Honda® engine

A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.

NOTE: LW Series In-Line Bale Wrappers come standard with a 9.7-kW (13-hp) Honda engine.

Single- and dual-power drive
Optional single-power driveOptional single-power drive

Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.

Steering remote control
Remotely stops and starts the unitRemotely stops and starts the unit

This remote control allows the operator to steer, start, and stop the machine without using the control panel on the machine.

Twin wrap kit
Twin wrap kitTwin wrap kit

This kit provides a double layer of wrap, increasing the amount of wrap applied to bales.

Work lights
Lights allow operators to work longer hoursLights allow operators to work longer hours

For early morning or late-night work, choose between two optional work lights: light-emitting diode (LED) and halogen.

Guide rollers
Optional guide rollersOptional guide rollers

Optional guide rollers help keep the bales on the bale ramp in uneven terrain.

Power jack
Power jackPower jack

The optional power jack hydraulically raises the bale ramp to a level position to eliminate air pockets between bales when starting a row. The bale ramp is lowered after three bales have been wrapped.


Honda is a trademark of Honda Motor Co., Ltd.

Adjustable tongue (hitch) folds out of way for easy repositioning of unit
Adjustable tongue (hitch)Adjustable tongue (hitch)

The adjustable tongue (hitch) folds neatly out of the way for wrapping. It is located at the opposite end of where the bales are wrapped.

The adjustable tongue makes moving and repositioning the machine a quick and easy task, saving time and money.

Control box and levers are control center of machine
Multipurpose control centerMultipurpose control center

The control box and levers are the control center of the in-line bale wrappers. 


Some of the uses include turning the unit on and off, and controlling the bale ramp and bale push. 


Overall machine height 2.7 m
9 ft
Overall machine width 2.7 m
9 ft
Overall machine shipping length 5 m
16.4 ft
Overall machine length 7.7 m
25.4 ft
Weight 2,381.4 kg
5,250 lb
Towing unit minimum weight 1,587.6 kg
3,500 lb
Bale capacity
Round bale diameter 1.7 m
5.5 ft
Square bale size 0.9x0.9x.1.7 m
3x3x5.5 ft
Quantity Four (two front, two rear)
Size (front) 11L-15 Implement
Size (rear) 11L-15 Implement
Engine type Honda
Engine size 9.7 kW
13 hp
Alternator size, amp 18 amp
Start type Electric
Type Electric over hydraulic 12 V
Hydraulic system Self-contained
Steering Hydraulic with optional remote control
Power drive Optional: hydraulic single or dual wheel
Folding tail gate Hydraulic
Lift mechanism Optional hydraulic power jack
Compacting brakes Hydraulic adjustable pressure valve
Hoop speed Adjustable flow control valve
Cycle time Adjustable with limit switches
Wrapping capacity 120 bales per hour
Film tensioners Two aluminum rollers: 76.2 cm
30 in.
with stretch: 55 percent
Bale alignment Adjustable bale guides
Bale guide rollers Optional
Final bale push off
Bale pusher Self-contained scissor linkage
Unloading Manual cross tube
Type Folding
Length Adjustable
Lighting, marking and safety
Transport safety lights Standard
Markings SMV and reflectors
Safety tow chain Standard
Jack Standard
Set-up time
Labor hours 1
Machine 1 year